Skip to menu

Speedmaster SM 74-6 Color With Inline Coater

 

The traditional plate making process often results in the loss of detail and poor plate quality.

The CTP (Computer to plate) system bypasses the paste-up and film process of traditional plate making, 

and creates plates straight from approved files. The result is plates with the same level of quality as the original files.

 

120717_pbl_print_3_IMAGE_RATIO_2_8.jpg

 

Pico Printing : Direct Plate System

 

The traditional plate making process often results in the loss of

detail and poor plate quality.

The CTP (Computer to plate) system bypasses the paste-up and

film process of traditional plate making, 

and creates plates straight from approved files. The result is plates with the same level of quality as the original files.

 

 

 

 

iStock_000014522565XSmall_printing.jpg

Digital Blueline Proofing System

 

The AGFA-Sherpa 2's digital proofing system makes it easy to correct typographical errors. It creates bluelines from the same file used to make the plate and prints on both side of the sheets.

ryobi3302.jpg

 

SPICA-229P

 

Reduced operator wokload due to extensice automation

- Cuts waste of time and increases production effciency

 

Space-saving compact design

- Multifunctional press in compact design with iutstanding cost-performance

 

Full CIP4 data compatibility allows implementation of advanced digital workflow

- Broad coverage expands business opportunities

 

Complete maintenance backup

- Total support system ensures easy, consistent operation 

spica_229pw.jpg

offset-printer.jpg

   SABER-X15-Paper-Cutter.jpg  heidelberg_stitchmaster_300.jpgls26_29.jpg

 

 

 

Mitsubishi Offset Litho Press

mitsubishi_press.png

 

A Graphics Printer was undertaking work on an electrical system when an electrician introduced a voltage spike into the system causing significant damage to the 40 inch Litho Press, the company called in Mitsubishi to resolve the problem. 

Mitsubishi identified the Toyo Denki 37kW VF16S AC Drive as the main fault,and observed that an overload voltage had caused significant damage to its circuitry. To compound the problem these drives are now obsolete, so it either had to be completely refitted (which Mitsubishi reckoned would have taken over a week) or the drive had to be repaired quickly. 

Mitsubishi and the printer elected to call out NDC. A Service Engineer was despatched and had the drive stripped out and taken for repair. Within a few days NDC had the obsolete drive repaired and re-installed, our Service Engineer and the Mitsubishi engineer then ran the Litho Press through a series of tests to prove the system and that the repair was robust. After the testing proved the repair met with the Mitsubishi specification, the Litho Press was ready to resume its job. Both the customer and Mitsubishi were delighted to get the Litho press running again whilst mitigating expensive downtime and a costly and time consuming refit. 

It just goes to prove that using NDC on your repairs will save you both time and money.

Avalon N4.jpg

 

 

Avalon N4

The Avalon N4 thermal CtP system

Precise Dot Reproduction

Avalon N4's accurate thermal imaging system is designed to consistently reproduce the finest dots on plate, which results in highly detailed results on press.

Chemistry-free Plate Compatibility

The Avalon N4 is compatible with the Azura TS chemistry-free plates. They provide a more efficient alternative to traditional thermal plates. The Azura TS completely eliminates hazardous chemicals for more consistent imaging and also reduces the number of production steps, helping to streamline your workflow.

ECO-FRIENDLY, CHEMISTRY-FREE PLATE

Azura TS.JPG

 

Azura TS

 

The reliable and consistent quality that our clients deserve: with Azura TS, the chemical-free plate system.


No Processing Variables

Azura TS plates can easily be added to any workflow. Because they use no chemical processing, they are safer, simpler and more consistent for everyone to use. And they provide the convenience of daylight handling, allowing them to be used in any prepress environment.

High-quality Results on Press

Azura TS plates provide 2 - 98% dpi screen tints at 200 lpi depending on imaging conditions, yielding excellent results on press. They also give you up to 100,000 impressions depending on printing conditions for high productivity.

ThermoFuse Technology

During imaging, particles within the Azura TS plate are fused together by the thermal laser to create an image. A physical process then bonds the image to the substrate, with absolutely no chemical processing involved. A dedicated cleaning unit uses gum to finish the plate and clean the un-fused areas, leaving you with a press-ready Azura TS plate.